Furnace and heating repair in Midland.
Furnace and heat pump repair in Midland starts with the $99 diagnostic visit. A third of owner homes in 22728 heat with propane, most of the rest electric.
- Prices in writing, first
- Furnaces, heat pumps and boilers
- Dedicated HVAC team
Get your heating repair priced
Midland heat comes off a propane tank or the power line, almost never a gas main.
Of the 1,066 owner homes the Census counts across ZIP 22728, 622 heat with electricity, mostly heat pumps with electric strips for backup, and 354 burn propane from a tank on the property. Natural gas heats 12. So a no-heat call in Midland nearly always comes down to a heat pump that can’t hold the house, or a propane furnace that won’t light, won’t stay lit, or has run its tank dry.
NOAA’s 1991 to 2020 normals for its Warrenton 3 SE station, about six miles north-northwest, count roughly 4,685 heating degree days a year, a January average low of 24.8, and about 13 days a year when the high never climbs past freezing. Freezing nights usually start around November 1 and keep coming until about April 9. A worn igniter or a sluggish inducer motor tends to give up on the first real cold morning.
Fauquier County’s building code sizes heating for 17 degrees outside, and the normals count about five nights a year at 10 or colder. The station read 3 degrees in January 2014 and 2 on two February nights in 2015, and late January 2026 brought Extreme Cold Warnings with wind chills of zero to 10 below across the Piedmont. A heat pump running nonstop on a 5 degree night is doing its job. One that can’t catch up on a 40 degree afternoon needs a look.
Storms take the power, and a propane furnace is as electric as a heat pump: its igniter, control board and blower all need current. The County’s 911 center logged about 1,100 reports in the March 2018 windstorm, mostly trees and wires, and in December 2020 ice built up half an inch thick at Opal. When the lights come back and the heat doesn’t, check the furnace’s service switch and the breakers once, then call us after the storm and we’ll check the whole system.
Midland houses, by the numbers
From the Census Bureau’s 2020 to 2024 survey. Median year built and heat count owner-occupied homes only.
Midland
ZIP 22728 as a whole: every Midland address, the village included. The Census place for the village alone has too few homes for steady figures.
- Median home built1986 Census
- Built before 1980about 4 in 10 Census
- Built since 2000about 2 in 10 Census
- Most homes aresingle-family houses, about 9 in 10 Census
- Heated withelectricity, about 6 in 10 Census
- Rentedabout 1 in 10 Census
- Electric heat here usually means a heat pump with electric strips as backup, and a heat pump stuck on those strips shows up on the electric bill.
What furnace repair costs in Midland.
The same price book as the rest of our site. The diagnostic visit is $99, and the tech prices the repair before starting it.
- Flame sensor cleaned$95 to $180
- Igniter or flame sensor replaced$240 to $410
- Blower wheel pulled and cleaned$300 to $440
- Thermostat replaced$300 to $640
- Control board$550 to $1,180
- Blower motor$670 to $2,400
- Repair diagnostic visit$99
Often same-day, and we will tell you honestly when we can get there.
With Comfort+ membership, $20 a month or $199 a year, the diagnostic visit is included, any service is 15% off, and a heating maintenance visit comes every fall.
What a failing furnace in Midland usually does.
The propane furnace lights, drops out, then locks itself out
Most furnaces try to light a few times, then shut down and wait. If yours only comes back after you flip its switch off and on, note the blinking light on the control board and call. The usual causes are a dirty flame sensor, cleaned for $95 to $180, or a weak igniter, replaced for $240 to $410, and the tank gauge is worth one look first.
The heat pump blows cool air
A few minutes of cool air in winter is a defrost cycle, and that’s normal. Cool air all the time, or emergency heat running all day, is a call.
It smells the first time it runs
Dust burning off the heat exchanger smells for the first few minutes of the season, then stops. A gas smell is different: leave the house and call your gas company from outside.
What the county says about your heat in Midland.
Fauquier County
Fauquier County Fire Rescue takes requests for help getting smoke and carbon monoxide alarms through a form on its Public Education page. Source.
How to pick the best furnace repair company in Midland.
Questions worth asking anybody who comes out, us included.
Will they price the part before they fix it?
Flame sensors, igniters and control boards all have a going rate. A tech who can’t tell you the number before starting is asking you to find out afterwards.
Do they look at the venting, not just the flame?
Getting the burners lit is half a heating call. Ask whether they check the flue and test for carbon monoxide while the panel’s open.
Do they know when a repair isn’t worth it?
A big repair on a furnace past 15 or 20 years deserves a replacement price next to it. A good tech puts both numbers in front of you and lets you choose.
What our customers say.
We had a mini split ac/heat unit installed. They were here when they said they would be, were very professional, and did a very nice job.
5.0 stars across 884 Google reviews. Read them on our reviews page.
Heating repair questions from Midland.
When should I test the heat in Midland?
In October, on a cool evening, before you need it. Set the thermostat a few degrees above the room and give it fifteen minutes: a heat pump should blow warm air, and a propane furnace should light and stay lit. If something’s off, you’ve found it before the first freeze instead of during it.
What should I do before a winter storm reaches Midland?
Check the propane gauge and call your supplier if it’s getting low; a storm that blocks roads can keep the delivery truck away too. Find the furnace’s service switch and the heat pump’s breakers before you need them. Then hold the thermostat steady overnight, since a big morning catch-up leans hard on the backup strips.
How much does furnace repair cost in Midland?
The diagnostic visit is $99. A flame sensor cleaned is $95 to $180; an igniter or flame sensor replaced, $240 to $410; a control board, $550 to $1,180; a blower motor, $670 to $2,400.
Should I repair it or replace it?
Fix the small parts on almost anything. Before a big repair on an old furnace, look at the replacement number: a furnace alone, keeping the air conditioner you have, runs $4,285 to $14,040 installed, and the HVAC estimator gives your number in about a minute.
Furnace repair in the towns next door.
- Furnace repair in Bealeton
- Furnace repair in Warrenton
- Furnace repair in Nokesville
- Furnace repair in Bristow
More from SwiftPro in Midland
Tell us what your heat is doing.
Call, or book online and pick a window. The tech prices the repair from the book before starting, and if the furnace is at the end of its life you’ll hear that first.
SwiftPro Heating, Cooling & Plumbing is a licensed, BBB Accredited (A rating), independently owned heating, cooling and plumbing company in Chantilly, serving Midland and the rest of Northern Virginia. Virginia contractor license #2705192276. 5.0 stars across 884 Google reviews. SwiftPro maintains a dedicated HVAC team and a dedicated plumbing team.
SwiftPro Heating, Cooling & Plumbing, 4230 Lafayette Center Dr, Suite N, Chantilly, VA 20151, (703) 997-9757. Book online, read our reviews, or see every town we serve.