Three or more pinhole leaks in a couple of years
One leak is a repair. Three in two years, in different places, means the copper is thinning from the inside everywhere, and the next one is already on its way.
Whole-house repipe in Ashburn, copper or PEX.
Repipe jobs we’ve done have run $1,000 to $12,000, and a whole-house number is written after a walk-through. Ashburn Farm and Ashburn Village started going up in the late 1980s, right in the years polybutylene was going into new houses. If your supply pipe is grey plastic, or the copper has started leaking in more than one place, this page is for you. Call SwiftPro at (703) 997-9757, 24 hours a day, 7 days a week.
Prices checked .
From about $17 a month at 0% APR for 60 months, the whole price financed, on approved credit. How financing works
Tell us what the pipe is doing. We’ll look before anyone talks price.
- Written price before work starts
- Permitted and inspected
- VA Class A #2705192276
- Family owned. Not corporate. Local and accountable.
- A dedicated plumbing team, not HVAC techs doing plumbing on the side.
- Copper or PEX, and the quote says which.
5.0 stars across 1,138 reviews
Get your price in writing
Send this and the office calls or texts you back to set a time.
We’ll call or text this number about your request. By sending it you agree to our terms and privacy policy.
Rather talk now? (703) 997-9757
Licensed and insuredVirginia Class A contractor #2705192276
24/7 emergency serviceWe answer day or night, and we will tell you honestly when we can get there.
Our own plumbers, our own trucksNobody here is a subcontractor with a magnet on the door
The price is settled before the workYou see the number in writing before anything is taken apart
The short version
How you know it’s time, and how you know it isn’t.
Three things mean a repipe. Everything else is usually a repair. Most Ashburn houses are new enough that it’s the first one that brings us out.
Grey plastic pipe stamped PB2110
That’s polybutylene. It went into houses built or replumbed between 1978 and 1995, it fails from the inside with no warning, and some insurance carriers won’t write a policy on a house that still has it.
Rust-colored water and weak flow at every tap
Galvanized steel rusts shut from the inside. If the flow is bad everywhere and the water runs brown after it sits, the pipe is the problem, not the faucets.
What isn’t a reason to repipe: one leak, the age of the house on its own, or low pressure by itself. Weak pressure at every fixture is usually the pressure reducing valve at the main, which runs $500 to $1,000 to replace. We check that first, every time (why).
Copper or PEX
What goes back in the walls
Copper
Type L copper is what most of Northern Virginia was built with, and it lasts. It costs more in material and labor, and every joint is soldered.
PEX
Flexible plastic supply pipe, run in long lengths with far fewer fittings, so fewer walls get opened. Both are approved under the Virginia plumbing code. We’ll tell you which fits your house and your water, and the quote says which you’re getting.
What to expect
What a repipe in Ashburn looks like
- 1
Walk-through and a written price
We look at what’s in the walls now, where it runs, and how much of the house has to open. The price is written before anything starts.
- 2
Permit pulled
A repipe is permitted work. We pull the county plumbing permit, so it gets inspected like it should.
- 3
New pipe in, old pipe out
Most of the run goes through the basement ceiling and existing chases. Walls get opened where the pipe runs and only there. The water is off for part of each day, not the whole job.
- 4
Inspected, then closed
The county inspects before anything is covered. Your written quote says who patches the openings.
Straight answers
What this work costs
Ranges from jobs we’ve actually done. Yours is priced in writing before anything starts.
Whole-house repipe
Repipe jobs we’ve done have run $1,000 to $12,000. One fixture’s section sits at the bottom, the full basement runs and every riser at the top. Yours is written after a walk-through.
or $17/mo at 0% APR for 60 months
Pressure reducing valve
Generally $500 to $1,000. Worth checking before anyone talks about repiping.
Water service line, meter to house
Water service line work generally runs $3,500 to $8,000.
or $58/mo at 0% APR for 60 months
$17/mo60mo @ 0% APR
Price range
$1,000-$12,000
8yrs @ 7.99%
$14/mo
15yrs @ 9.99%
$11/mo
Monthly figures on the starting price, the whole price financed, on approved credit. The lender sets the final terms. How financing works
Where we go
Across Ashburn
Our Ashburn office is on Endicott Drive. If you’re not sure what your house was plumbed with, the pipe where the water comes in, usually in the basement or a utility closet, tells you in about ten seconds: grey plastic, copper, or dull grey steel.
New copper supply, every branch with its own tagged shutoff, installed by our plumbing crew. This is what the pipe in your basement looks like when we’re done.
Questions we hear every week
Repipe questions in Ashburn
Was my Ashburn house built with polybutylene?
If it was built or replumbed between 1978 and 1995, it might be. Look at the pipe coming off the water heater or where the main comes in: grey plastic stamped PB2110 is polybutylene. Many Ashburn houses from those years were built with copper instead, so look before you worry.
Will my insurance care about polybutylene?
Some carriers list it as unacceptable and won’t write a new policy, or want it gone at renewal. If you’re buying or refinancing in Ashburn, ask your agent before closing.
Do I have to move out for a repipe?
No. The water is off for part of each day while we tie in, and on at night.
Copper or PEX?
Both are approved under the Virginia plumbing code. Copper is what most houses here were built with and costs more to put in. PEX runs in long lengths with fewer fittings, so fewer walls open. The quote says which you’re getting.
Do you check the pressure first?
Every time. Virginia’s plumbing code requires a pressure reducing valve above 80 psi, and parts of Northern Virginia see 100 or more at the street. A failed valve, at $500 to $1,000, explains a lot of what gets blamed on the pipes.
Keep reading
More on the pipes in your house
Not sure it’s a repipe? We’ll tell you.
Book a walk-through. If it’s one bad section or the pressure valve, you’ll hear that, and the price for that instead.
SwiftPro Heating, Cooling & Plumbing
4230 Lafayette Center Dr N, Chantilly, VA 20151
44679 Endicott Dr, Suite 211, Ashburn, VA 20147
SwiftPro Plumber & Water Heaters
4200 Lafayette Center Dr, Suite N, Chantilly, VA 20151
Virginia Class A contractor license #2705192276
Licensed Class A #2705192276 · With three locations in Chantilly and Ashburn, serving all of Northern Virginia