Open 24/7 for emergencies
A new well pump on your existing pipe and wire runs $2,781 to $4,000 installed.
Price range
$2,781-$4,000
8yrs @ 7.99%
$39/mo
15yrs @ 9.99%
$30/mo
Monthly figures on the starting price, the whole price financed, on approved credit. The lender sets the final terms. How financing works
Get your price in writing
Send this and the office calls or texts you back to set a time.
We’ll call or text this number about your request. By sending it you agree to our terms and privacy policy.
Rather talk now? (703) 997-9757
Well pump repair in Paeonian Springs, 20129, where old village wells sit on small lots. We test the pump, its wire and the tank before pulling anything. The $49 plumbing visit that tests it first is waived when you go ahead with the repair.
5.0 stars across 1,132 reviews
Two of our plumbers in a Northern Virginia mechanical room, where a well’s pressure tank usually lives.
Licensed and insuredVirginia Class A contractor #2705192276
24/7 emergency serviceWe answer day or night, and we will tell you honestly when we can get there.
Our own plumbers, our own trucksNobody here is a subcontractor with a magnet on the door
The price is settled before the workYou see the number in writing before anything is taken apart
What it costs
The span of what we’ve quoted and sold for well work in 2026. Depth, wire and what’s worn out set where yours lands, in writing before anything comes out of the well.
Pressure switch replacement
$450 to $609
Pressure tank replacement
$2,200 to $2,950
or $37/mo at 0% APR for 60 months
Well pump replacement
$2,781 to $4,000
or $46/mo at 0% APR for 60 months
Well pump, new wire and drop pipe
$4,900 to $6,500
or $82/mo at 0% APR for 60 months
Well pump, pressure tank and switch
$6,200 to $8,000
or $103/mo at 0% APR for 60 months
Deep well or full system rebuild
$9,500 to $16,500
or $158/mo at 0% APR for 60 months
Plumbing visit, waived when you go ahead with the repair
$49
Monthly figures: 60mo @ 0% APR on each starting price, the whole price financed, on approved credit. Longer plans lower the payment and cost more in total. The lender sets the final terms. How financing works
The $49 visit is waived when you go ahead with the repair. Pulling a pump just to look at it is $1,300 to $2,000, so we test the tank, the switch and the pump’s wire from the house first.
Replacing a pump needs no health department well permit in Virginia. We don’t drill or deepen wells; if yours needs that, we’ll tell you who to call.
Want your own number before anyone comes out? The well pump cost estimator asks what the water is doing and prices the likely fix.
What’s different in Paeonian Springs
Paeonian Springs still lives on groundwater: there’s no public water line anywhere in the village. When engineers studied it for Loudoun County in 2019, they reported the median village well at 37 years old and more than 30 were past 50. A few lots had no well of their own and drew from the one next door. If that’s you, a dead pump is a two-household problem, and it’s worth knowing whose tank and switch are whose before we start.
The same 2019 study found many of the older wells too shallow or missing a proper casing, and at least 36 out of line with state standards. That shapes a pump job here. A shallow well with a tired casing can let sediment in, and grit wears a submersible pump faster. When we bring a pump up in the village, we look at what came up with it. If the well itself needs deepening or a new casing, that’s a drilling rig, and we’ll tell you who to call.
The water also runs acidic. Village wells have tested low in pH, and the study ties that to corroded copper pipe and leaks inside homes. A pinhole between the tank and the faucets looks a lot like a failing pump from upstairs, because the pump keeps starting to replace the water you’re losing. So we check the house plumbing for a leak before we blame anything in the well. Health Department records in the study also show past bacteria and sediment trouble, with chlorination recommended.
Step outside the old village and the wells change. County records count 1,708 active household wells within three miles, a circle wide enough to take in Waterford’s village too, with a median recorded depth of 420 feet. The 2000s added more of those wells than any other decade, by our count. A newer house on a 400 foot well and an 1890s house on a shallow one are different jobs: depth decides how much pipe and wire the pump hangs on, and age decides what else is worn.
When to call
On a small lot with old copper, that’s often a leak, not the pump. Close every faucet, watch the gauge on the tank, and if the needle falls anyway, tell us when you call. It saves you paying to pull a pump that was fine.
A pump that starts every few seconds usually means the pressure tank lost its air cushion. Every start wears the motor, so it’s worth a call this week, not next month.
Check the well pump’s breaker first. If it tripped once, reset it once. If it trips again, leave it off: the pump, its wire or the switch needs testing.
When the power goes out
The Virginia Department of Health puts it simply: if your home is on a well, the pump won’t work when the power is out. Here’s what to do before, during and after.
When a big storm is coming, fill a few jugs and the bathtub. Once the pump stops, all you have is what’s left in the pressure tank, and toilets need water to flush.
Many well pumps run on 240 volts. Franklin Electric’s installation manual says a transfer switch must be used any time a generator backs up a well pump, and VDH says to have the hookup made by a licensed electrician.
Franklin’s minimum for a 1 horsepower two-wire pump is a 6 kW generator, and 4 kW for a 1 horsepower three-wire pump. Not sure which yours is? The control box on the wall in the basement means three-wire.
Give the pump a minute to refill the tank. No water? Look at the well pump’s breaker. A surge can also take out the pressure switch or the control box, which we can test from the house.
VDH says to treat a well that was under floodwater as contaminated, and not to run the pump until its wiring is dry. Then shock chlorinate the well and test the water one to two weeks later.
Virginia Cooperative Extension recommends shock chlorinating after any repair to a well system, then a bacteria test one to two weeks later. A well’s water is the owner’s to look after: the EPA doesn’t regulate private wells.
Power back and still no water? Check the breaker, then call us. We’ll test the switch, the control box and the pump from the house before anything comes out of the well.
Who keeps the well records
The Loudoun County Health Department reviews permits, installations and condition reports for wells, and it advises a yearly well check that includes a bacteria test. Source.
Our Virginia Class A contractor license, 2705192276, is on the side of the van.
Choosing who works on it
Questions to ask anybody who quotes you, us included.
If two houses draw from one well, ask who talks to the neighbor and whose equipment is whose. Replacing the pump shuts off water to both homes, so the work should be planned with both of you, not sprung on one.
Pulling a pump is the expensive part of the job. Ask whether they check the tank’s air charge, the pressure switch and the pump’s amp draw and wire from the house first, so you don’t pay to pull a pump that was fine.
Ask for the part that failed and its price, written down, before the pump comes up. If the price can change once the pump is out, ask what would change it, like worn wire or a bad pitless adapter.
Two of our crew going over a work order before the day's calls.
From our Google reviews
5.0 stars across 1,132 reviews. Read them on our reviews page.
“Tyson came out to diagnose our well system and did so with ease! Within no time he had it figured out and provided a solution for us. Very reasonable pricing, phenomenal quality of work and knowledge can’t be beat!”
Where we work
Next door to Paeonian Springs: Waterford, Hamilton, Leesburg, Lovettsville and Purcellville.
Questions
No. Loudoun County and Loudoun Water are designing one combined system for Paeonian Springs and Waterford, but it isn’t approved for construction. The County’s schedule has design and permits through 2028, with the Board of Supervisors deciding on funding in 2029. A pump that quits this winter still has to be replaced this winter.
It’s the copper pipes that take the worst of it, and the 2019 study blamed acidic water for leaks in village homes. Fixing the pH is a water treatment question, so start with a test. VCE Loudoun’s testing program offers a $70 kit, though sign-ups are on a 2027 waitlist.
A new submersible pump on your existing pipe and wire runs $2,781 to $4,000 installed, and with new wire and drop pipe it’s $4,900 to $6,500. A pressure tank alone is $2,200 to $2,950 and a pressure switch is $450 to $609. You get the number in writing before we pull anything.
Not a well permit. Virginia’s private well rules say replacing a pump, or a well cap or seal with an equivalent one, isn’t a well alteration. Building, deepening or abandoning a well does need a health department construction permit.
Ready when you are
Call, or send the form at the top. No water at all? Call, and say so first. Often same-day, and we will tell you honestly when we can get there.
SwiftPro Heating, Cooling & Plumbing
4230 Lafayette Center Dr N, Chantilly, VA 20151
44679 Endicott Dr, Suite 211, Ashburn, VA 20147
Virginia Class A contractor license #2705192276
SwiftPro Heating, Cooling & Plumbing is a licensed, BBB Accredited (A rating), independently owned heating, cooling and plumbing company in Chantilly, serving Paeonian Springs and the rest of Northern Virginia. Virginia contractor license #2705192276. 5.0 stars across 1,132 reviews on Google, Angi, Yelp, the BBB and Facebook. SwiftPro maintains a dedicated HVAC team and a dedicated plumbing team.
From SwiftPro Heating, Cooling & Plumbing in Chantilly. Housing figures are the Census Bureau’s American Community Survey, 2020 to 2024, for each place named; permit, water and sewer facts link to each office’s own page and were checked in September and October 2026.