A well that once kept up and now doesn’t
Aldie wells often yield well, so a house that suddenly runs short is usually a pump, wire or tank problem first. We test those from the house before anyone blames the well.
Aldie, Virginia
Well pump repair in Aldie.
A new well pump on your existing pipe and wire runs $2,781 to $4,000 installed.
$46/mo60mo @ 0% APR
Price range
$2,781-$4,000
8yrs @ 7.99%
$39/mo
15yrs @ 9.99%
$30/mo
Monthly figures on the starting price, the whole price financed, on approved credit. The lender sets the final terms. How financing works
Get your price in writing
Send this and the office calls or texts you back to set a time.
We’ll call or text this number about your request. By sending it you agree to our terms and privacy policy.
Rather talk now? (703) 997-9757
Well pump repair in Aldie, 20105, for the houses past the subdivisions that still run on a private well: we test the pump, wire and tank before anything comes up. The $49 plumbing visit that tests it first is waived when you go ahead with the repair.
- Pump, wire and tank tested first
- Priced in writing before we pull it
- Our own licensed plumbers
5.0 stars across 1,132 reviews
Two of our plumbers in a Northern Virginia mechanical room, where a well’s pressure tank usually lives.
Licensed and insuredVirginia Class A contractor #2705192276
24/7 emergency serviceWe answer day or night, and we will tell you honestly when we can get there.
Our own plumbers, our own trucksNobody here is a subcontractor with a magnet on the door
The price is settled before the workYou see the number in writing before anything is taken apart
What it costs
What well pump repair and replacement cost in Aldie.
The span of what we’ve quoted and sold for well work in 2026. Depth, wire and what’s worn out set where yours lands, in writing before anything comes out of the well.
Pressure switch replacement
$450 to $609
Pressure tank replacement
$2,200 to $2,950
or $37/mo at 0% APR for 60 months
Well pump replacement
$2,781 to $4,000
or $46/mo at 0% APR for 60 months
Well pump, new wire and drop pipe
$4,900 to $6,500
or $82/mo at 0% APR for 60 months
Well pump, pressure tank and switch
$6,200 to $8,000
or $103/mo at 0% APR for 60 months
Deep well or full system rebuild
$9,500 to $16,500
or $158/mo at 0% APR for 60 months
Plumbing visit, waived when you go ahead with the repair
$49
Monthly figures: 60mo @ 0% APR on each starting price, the whole price financed, on approved credit. Longer plans lower the payment and cost more in total. The lender sets the final terms. How financing works
The $49 visit is waived when you go ahead with the repair. Pulling a pump just to look at it is $1,300 to $2,000, so we test the tank, the switch and the pump’s wire from the house first.
Replacing a pump needs no health department well permit in Virginia. We don’t drill or deepen wells; if yours needs that, we’ll tell you who to call.
Want your own number before anyone comes out? The well pump cost estimator asks what the water is doing and prices the likely fix.
What’s different in Aldie
Most of Aldie is on Loudoun Water. The farms around it sit on wells about 300 feet down.
Aldie is two places on one ZIP code. More than nine in ten homes in 20105 went up after 2000, and in Stone Ridge the homeowners’ association lists Loudoun Water as the utility, so a lot of Aldie never thinks about a pump. The other Aldie is the land along Route 50 and out toward the Little River, where Loudoun Water’s own capital plan says most rural properties run on wells their owners look after. County well records count 785 active household wells within three miles of the village.
Those wells are shallower than the county’s as a rule. Loudoun’s records put the median Aldie-area well at 300 feet, against 350 for the county, and half of them fall between about 240 and 420 feet. Age matters, though. Wells on record from the 1970s have a median near 190 feet; the ones from the 2020s, about 400. A pump at 190 feet and one at 400 need very different lengths of wire and pipe, which is why a new pump alone and a pump with new wire and drop pipe are separate prices.
Aldie’s wells also tend to give more water. The median recorded yield near the village is 20 gallons a minute, where the county’s is 12. That’s a median, not a promise for your lot: Loudoun’s water sits in cracks in the bedrock, and two wells a few hundred feet apart can behave nothing alike. If a pump tests fine and the faucets still sputter after a long fill, the well itself may be the limit. If it needs deepening, that’s a drilling rig, not us, and we’ll tell you who to call.
The old village is its own case. Loudoun’s General Plan says Aldie is the only one of the county’s historic villages served by a private water company, so a house on the Route 50 strip near the mill may have no well at all. Before you book a well pump visit there, check the bill. A water company bill means your trouble is in the house plumbing, and that’s a plumbing call instead.
By the numbers
Aldie houses, by the numbers
From the Census Bureau’s 2020 to 2024 survey, owner-occupied homes unless it says otherwise.
Aldie
ZIP 20105 as a whole: every Aldie address, inside Stone Ridge and out.
- Median home built2013 Census
- Built before 1980hardly any Census
- Built since 2000about 9 in 10 Census
- Most homes aresingle-family houses, about 6 in 10 Census
- Heated withgas, about 8 in 10 Census
- Rentedabout 1 in 10 Census
- In houses this new, the pressure tank and switch are often the builder’s originals, and a bladder tank lasts five to seven years on average.
When to call
When a well pump in Aldie needs a plumber.
The tank came with the house
On a house built in the 2000s, the pressure tank, the switch and often the pump are the builder’s originals. A bladder tank lasts five to seven years on average, so many of these are on their second or third.
The pump clicks on and off
A pump that starts every few seconds usually means the pressure tank lost its air cushion. Every start wears the motor, so it’s worth a call this week, not next month.
When the power goes out
When the power goes out in Aldie, so does the well.
The Virginia Department of Health puts it simply: if your home is on a well, the pump won’t work when the power is out. Here’s what to do before, during and after.
- 1
Fill up before the storm
When a big storm is coming, fill a few jugs and the bathtub. Once the pump stops, all you have is what’s left in the pressure tank, and toilets need water to flush.
- 2
A generator needs a transfer switch
Many well pumps run on 240 volts. Franklin Electric’s installation manual says a transfer switch must be used any time a generator backs up a well pump, and VDH says to have the hookup made by a licensed electrician.
- 3
Size the generator for the pump
Franklin’s minimum for a 1 horsepower two-wire pump is a 6 kW generator, and 4 kW for a 1 horsepower three-wire pump. Not sure which yours is? The control box on the wall in the basement means three-wire.
- 4
When the power comes back
Give the pump a minute to refill the tank. No water? Look at the well pump’s breaker. A surge can also take out the pressure switch or the control box, which we can test from the house.
- 5
Under floodwater? Leave it off
VDH says to treat a well that was under floodwater as contaminated, and not to run the pump until its wiring is dry. Then shock chlorinate the well and test the water one to two weeks later.
- 6
Test the water after well work
Virginia Cooperative Extension recommends shock chlorinating after any repair to a well system, then a bacteria test one to two weeks later. A well’s water is the owner’s to look after: the EPA doesn’t regulate private wells.
Power back and still no water? Check the breaker, then call us. We’ll test the switch, the control box and the pump from the house before anything comes out of the well.
Who keeps the well records
Who looks after private wells around Aldie.
Loudoun County
The Loudoun County Health Department reviews permits, installations and condition reports for wells, and it advises a yearly well check that includes a bacteria test. Source.
Our Virginia Class A contractor license, 2705192276, is on the side of the van.
Choosing who works on it
How to pick who works on your well pump in Aldie.
Questions to ask anybody who quotes you, us included.
Do they ask how deep the well is before quoting?
Around Aldie the recorded depth ranges from under 200 feet to well past 400. Anyone who quotes a pump without asking, or without checking the county’s well record, is guessing at the wire.
Will they test before they pull the pump?
Pulling a pump is the expensive part of the job. Ask whether they check the tank’s air charge, the pressure switch and the pump’s amp draw and wire from the house first, so you don’t pay to pull a pump that was fine.
Is the price in writing before anything comes out?
Ask for the part that failed and its price, written down, before the pump comes up. If the price can change once the pump is out, ask what would change it, like worn wire or a bad pitless adapter.
Two of our crew going over a work order before the day's calls.
From our Google reviews
What our customers say.
5.0 stars across 1,132 reviews. Read them on our reviews page.
“Tyson came out to diagnose our well system and did so with ease! Within no time he had it figured out and provided a solution for us. Very reasonable pricing, phenomenal quality of work and knowledge can’t be beat!”
Where we work
Well pump repair and replacement in every Northern Virginia town we serve
Next door to Aldie: Haymarket, Middleburg, Catharpin, Gainesville and Philomont.
Fairfax County
Arlington County
Loudoun County
Prince William County
Fauquier County
Stafford County
Questions
Well pump questions from Aldie.
Is my Aldie house on a well, Loudoun Water or the village’s water company?
Look at who sends the water bill. Loudoun Water or the village’s company means no well pump. No water bill, a pressure tank in the basement and a well cap in the yard means a private well, and that’s what this page is about.
Where do I get my Aldie well water tested?
Virginia Cooperative Extension’s Loudoun office runs a household water testing program: a $70 kit, with sign-ups on the 2027 waitlist. After any pump work, shock the well and test again in a week or two.
How much does well pump replacement cost in Aldie?
A new submersible pump on your existing pipe and wire runs $2,781 to $4,000 installed, and with new wire and drop pipe it’s $4,900 to $6,500. A pressure tank alone is $2,200 to $2,950 and a pressure switch is $450 to $609. You get the number in writing before we pull anything.
Do I need a permit to replace a well pump in Virginia?
Not a well permit. Virginia’s private well rules say replacing a pump, or a well cap or seal with an equivalent one, isn’t a well alteration. Building, deepening or abandoning a well does need a health department construction permit.
Ready when you are
Get the water running again.
Call, or send the form at the top. No water at all? Call, and say so first. Often same-day, and we will tell you honestly when we can get there.
SwiftPro Heating, Cooling & Plumbing
4230 Lafayette Center Dr N, Chantilly, VA 20151
44679 Endicott Dr, Suite 211, Ashburn, VA 20147
Virginia Class A contractor license #2705192276
SwiftPro Heating, Cooling & Plumbing is a licensed, BBB Accredited (A rating), independently owned heating, cooling and plumbing company in Chantilly, serving Aldie and the rest of Northern Virginia. Virginia contractor license #2705192276. 5.0 stars across 1,132 reviews on Google, Angi, Yelp, the BBB and Facebook. SwiftPro maintains a dedicated HVAC team and a dedicated plumbing team.
From SwiftPro Heating, Cooling & Plumbing in Chantilly. Housing figures are the Census Bureau’s American Community Survey, 2020 to 2024, for each place named; permit, water and sewer facts link to each office’s own page and were checked in September and October 2026.