A surge that isn’t the valve
If the shower pulses or sputters, the cause may be the pressure tank and not the valve. A cartridge fault is steady: it drips, or the handle is stiff. A tank fault is rhythmic.
For shower repair in Broad Run, the plumbing visit is $49, or $250 after hours. Call SwiftPro, rated 5.0 stars across 1,130 reviews, at (703) 997-9757, 24 hours a day, 7 days a week.
SwiftPro’s plumbers in Broad Run are rated 5.0 stars across 1,130 reviews and work under Virginia Class A contractor license 2705192276. Shower repair in Broad Run, where every home is detached and half predate 1980: we pull the handle, show you the worn part, then price it. A cartridge, stems or a diverter usually lands at $250 to $450. A whole new valve, trim included, runs $950 to $1,400, and a new tub spout runs $200 to $400.
5.0 stars across 1,130 reviews
Two of our plumbers in a Northern Virginia basement, beside the water heater and the supply lines that feed the bathrooms upstairs.
Get your price in writing
Send this and the office calls or texts you back to set a time.
We’ll call or text this number about your request. By sending it you agree to our terms and privacy policy.
Rather talk now? (703) 997-9757
Licensed and insuredVirginia Class A contractor #2705192276
24/7 emergency serviceWe answer day or night, and we will tell you honestly when we can get there.
Our own plumbers, our own trucksNobody here is a subcontractor with a magnet on the door
The price is settled before the workYou see the number in writing before anything is taken apart
What it costs
These are the same numbers on our shower and tub repair page, from jobs we’ve billed. The visit fee matches our plumbing price list.
Plumbing diagnosis visit
$49
Plumbing diagnosis visit, after hours
$250
Shower valve repair (cartridge, stems, handle, diverter)
$250 to $450
Shower valve replaced, new trim included
$950 to $1,400
Tub spout or diverter spout replaced
$200 to $400
Prices checked .
Where a repair lands in that range depends on the valve brand and how stuck the old cartridge is. You see the number in writing before anything comes apart.
A dripping sink or kitchen faucet is a different repair, with its own prices on our faucet repair page.
What’s different in Broad Run
A handle that rocks on the wall can be a loose screw or a worn grip, and the screw is the one to try. Pull the little cap or look under the handle’s lip. If it is tight and the handle still spins, the ridges inside it are gone, or the stem it grips is, and that is a part, not a new shower.
Every home in Broad Run’s ZIP is detached, and more than half were built before 1980. About one in six predates 1960. In a farmhouse that old, the tub can still have two handles on the wall, a hot and a cold, each a stem and a washer. Those drip when the washer hardens, and they scald when a toilet is flushed. We rebuild them, and tell you when a pressure-balancing valve is the better spend.
The 1970s ranches and split-levels that fill the rest of the older half often have an early single-handle valve from that decade. Their cartridges can be discontinued, so we read the brand off the old part before promising a repair. If a match exists, it is a $250 to $450 job. If it does not, a new valve with trim is $950 to $1,400.
Most Broad Run homes are probably on private wells and not a public water line. Fauquier’s plan doesn’t list Broad Run as a service district, and in Prince William County’s records none of the 178 single-family addresses checked sits within 200 feet of a water main. On a well, a pressure tank that cycles can make a shower surge or sputter in a way that looks like a valve problem. We run it with the pump off and on before we take a handle apart.
By the numbers
From the Census Bureau’s 2020 to 2024 survey. Median year built and heat count owner-occupied homes only.
ZIP 20137 as a whole: every Broad Run address. About one home in six of them is on the Prince William County side.
The signs
If the shower pulses or sputters, the cause may be the pressure tank and not the valve. A cartridge fault is steady: it drips, or the handle is stiff. A tank fault is rhythmic.
Usually a set screw under the cap that backed out, or worn teeth where the handle grips the cartridge. Tightening the screw only lasts if the teeth are still good.
On a single-handle shower that’s the cartridge. On an older two-handle or three-handle shower, it’s the washers or the stems. Either one comes out the front, and the wall stays closed.
Need shower repair in Broad Run?
A person answers day and night. See this month’s deals before you call.
Choosing who does it
Questions to ask anybody who pulls your shower handle off, us included.
A plumber who services wells will check the tank pressure before blaming the valve. Ask whether they will, and if the answer is vague, find someone who does.
Most loose handles and drips are a cartridge or a screw. A plumber who prices a new valve without looking inside first may be selling you a wall you didn’t need opened.
A shower that runs fine on its own can still jump hot when someone flushes. Ask them to run it both ways before they pack up.
Two of our crew going over a work order before the day's calls.
From our Google reviews
5.0 stars across 1,130 reviews. Read them on our reviews page.
Prompt, courteous, knowledgeable and friendly. Job installation of kitchen sink faucet a little pricey but nowadays what isn’t.
Where we work
Next door to Broad Run: The Plains, Haymarket, Gainesville, Marshall and Warrenton.
Questions
Probably not. A dripping hot handle is almost always a worn washer or stem, and the repair is usually in the $250 to $450 range. A new valve is the answer only if the stems are beyond saving, or if the shower scalds when a toilet flushes.
Maybe not. Sputtering as the pump cycles points to the pressure tank, or air in the line. If the shower is also stiff or drips when off, the cartridge is involved too. We check both before replacing anything.
Most shower valve repairs we do run $250 to $450, with the visit at $49, $250 after hours. A whole new valve with trim runs $950 to $1,400, and a tub spout runs $200 to $400.
Not for a cartridge, a handle or a diverter. Those come out the front. A valve replacement goes in from an access panel when there is one, and when there isn’t, a larger trim plate can usually cover the opening so the tile stays.
Ready when you are
Call, or send the form at the top. We pull the handle, show you the worn part, and you get the price in writing before we fix it.
SwiftPro Heating, Cooling & Plumbing
4230 Lafayette Center Dr N, Chantilly, VA 20151
44679 Endicott Dr, Suite 211, Ashburn, VA 20147
SwiftPro Plumber & Water Heaters
4200 Lafayette Center Dr, Suite N, Chantilly, VA 20151
Virginia Class A contractor license #2705192276
SwiftPro Heating, Cooling & Plumbing is a licensed, BBB Accredited (A rating), independently owned heating, cooling and plumbing company in Chantilly, serving Broad Run and the rest of Northern Virginia. Virginia contractor license #2705192276. 5.0 stars across 1,130 reviews on Google, Angi, Yelp, the BBB and Facebook. SwiftPro maintains a dedicated HVAC team and a dedicated plumbing team.
From SwiftPro Heating, Cooling & Plumbing in Chantilly. Housing figures are the Census Bureau’s American Community Survey, 2020 to 2024, for each place named; permit, water and sewer facts link to each office’s own page and were checked in September and October 2026.